Find a local concrete & driveways in Fort Worth, TX
Fort Worth, Fort Worth, Texas,'s expansive clay soil and heat make concrete crack and heave if it isn't poured with the right base, thickness, and control joints. Get matched with a local concrete contractor who builds for our ground, not against it.
Request a callback →Local context in Fort Worth
Fort Worth sits on expansive clay, which swells and shrinks with drought-to-downpour moisture swings — the main reason driveways, patios, and slabs crack here. Proper base prep, rebar/mesh spec, and control joints matter far more on Tarrant County soil than the concrete mix itself.
Spring (March–May) brings Fort Worth's hail and the busiest contractor backlog — schedule ahead when you can.
What to verify when hiring a concrete in Fort Worth
- After a hailstorm, get inspections in writing before signing with any storm-chaser crews working Fort Worth.
- Ask how the concrete accounts for expansive clay movement — it's the #1 cause of callbacks in Tarrant County.
- Confirm freeze and winterization steps — the 2021 statewide event showed how exposed Fort Worth homes are.
Serving Arlington Heights, Fairmount, TCU/Westcliff, Keller and the rest of the Dallas–Fort Worth area.
Permits and inspections for major work run through the City of Fort Worth Development Services.
Common concrete jobs in Fort Worth
- Cracked or heaved driveways and slabs
- New driveways, patios, and walkways
- Stamped and decorative concrete
- Sunken slabs (mudjacking / leveling)
- Proper base, rebar, and control joints
- Drainage and grading around the pour
What it costs in Fort Worth
$6–$14 per sq ft (decorative higher) · $4,000–$10,000 typical driveway
Labor rates in the Dallas–Fort Worth market are set by local demand; the statewide ranges above are a starting point, not a Fort Worth quote.
Licensing & permits
Frequently asked about concrete in Fort Worth
Do I need a permit for concrete work in Fort Worth?
Major concrete work in Fort Worth typically requires a permit and inspection through the City of Fort Worth Development Services; routine repairs usually don't. Ask the contractor who will pull the permit and verify any required trade license before hiring.
Why does concrete crack so much in Fort Worth, Texas?
Texas's expansive clay swells when wet and shrinks when dry, moving slabs up and down with the seasons. Hairline cracks are normal; major cracking usually means a thin pour, no rebar, a poor base, or missing control joints — all avoidable with the right contractor.
Do concrete contractors need a license in Fort Worth, Texas?
Texas has no statewide concrete contractor license. The difference between a 5-year and a 30-year pour is base prep, thickness, rebar/mesh, and control-joint spacing — ask what they spec, and confirm insurance and a written warranty.
How much does a concrete driveway cost in Fort Worth, Texas?
Plain concrete runs about $6–$10 per sq ft installed; stamped or decorative $10–$14+. A standard two-car driveway typically lands between $4,000 and $8,000 depending on tear-out, base, and reinforcement. Get a written quote listing thickness and rebar.