Find a local concrete & driveways in Austin, TX
Austin, Austin, Texas,'s expansive clay soil and heat make concrete crack and heave if it isn't poured with the right base, thickness, and control joints. Get matched with a local concrete contractor who builds for our ground, not against it.
Request a callback →Local context in Austin
Austin sits on rocky limestone caliche, which swells and shrinks with drought-to-downpour moisture swings — the main reason driveways, patios, and slabs crack here. Proper base prep, rebar/mesh spec, and control joints matter far more on Travis County soil than the concrete mix itself.
Mid-summer heat is peak season across the Austin–Round Rock area; spring and fall booking is easier.
What to verify when hiring a concrete in Austin
- Ask about hard-water impact — Austin's mineral content shortens the life of fixtures and equipment.
- Check that the plan suits Travis County's drought-to-downpour swings, not a generic spec.
Serving South Congress, Hyde Park, Mueller, Westlake and the rest of the Austin–Round Rock area.
Permits and inspections for major work run through the City of Austin Development Services Department.
Common concrete jobs in Austin
- Cracked or heaved driveways and slabs
- New driveways, patios, and walkways
- Stamped and decorative concrete
- Sunken slabs (mudjacking / leveling)
- Proper base, rebar, and control joints
- Drainage and grading around the pour
What it costs in Austin
$6–$14 per sq ft (decorative higher) · $4,000–$10,000 typical driveway
Labor rates in the Austin–Round Rock market are set by local demand; the statewide ranges above are a starting point, not a Austin quote.
Licensing & permits
Frequently asked about concrete in Austin
Do I need a permit for concrete work in Austin?
Major concrete work in Austin typically requires a permit and inspection through the City of Austin Development Services Department; routine repairs usually don't. Ask the contractor who will pull the permit and verify any required trade license before hiring.
Why does concrete crack so much in Austin, Texas?
Texas's expansive clay swells when wet and shrinks when dry, moving slabs up and down with the seasons. Hairline cracks are normal; major cracking usually means a thin pour, no rebar, a poor base, or missing control joints — all avoidable with the right contractor.
Do concrete contractors need a license in Austin, Texas?
Texas has no statewide concrete contractor license. The difference between a 5-year and a 30-year pour is base prep, thickness, rebar/mesh, and control-joint spacing — ask what they spec, and confirm insurance and a written warranty.
How much does a concrete driveway cost in Austin, Texas?
Plain concrete runs about $6–$10 per sq ft installed; stamped or decorative $10–$14+. A standard two-car driveway typically lands between $4,000 and $8,000 depending on tear-out, base, and reinforcement. Get a written quote listing thickness and rebar.